SolarEdge Integration
GridMind integrates with the SolarEdge Monitoring API to display your solar inverter production data alongside your battery and EV information. SolarEdge is a monitoring-only integration — GridMind reads production data but does not send commands to SolarEdge hardware.
Supported Hardware
- All SolarEdge single-phase and three-phase inverters
- StorEdge battery (monitoring only, no control)
- SolarEdge EV Charger (monitoring)
Prerequisites
- SolarEdge monitoring account at monitoring.solaredge.com
- API key enabled on your account (Settings → API Access in the monitoring portal)
- Your Site ID (visible in the monitoring portal URL)
Setup
- In GridMind, go to Settings → System Management → Add Connection → SolarEdge
- Enter your API Key and Site ID
- Click Connect — GridMind immediately begins pulling production data
What’s Available
| Capability | Available | Notes |
|---|---|---|
| Real-time solar output | ✓ | 15-minute intervals from SolarEdge API |
| Inverter production data | ✓ | Per-inverter breakdown |
| Battery (StorEdge) | Monitor only | No control commands available |
| EV charger status | Monitor only |
SolarEdge data arrives in 15-minute intervals from the SolarEdge API — not real-time. The dashboard will show the most recent 15-minute reading.